Mayser Mini Safety Edges / break contact safety edges

Tiny dimensions and giant reliability, these are the characteristics of the Mayser Mini Safety Edges. Specially designed with crushing and shearing hazards in mind, the high-quality safety systems are used wherever only minimum overtravel distances and installation heights are possible. The classic example is the use of Anti Pinch Sensor on power car windows and vent windows, tail gates, sliding doors and roofs. Even angular safety edges are possible.

The break contact safety edges (Category 3 in accordance with EN 954) SL/NC II (NC = normally closed) work using a safe NC contact chain. In the case of the SL/NC II the force guided contacts and the double-insulated cable are the significant factors. The function of the safety edges is as safe as it is simple. When the break contact safety edge is activated the closed circuit current is interrupted and the hazardous motion is immediately stopped. The Mayser break contact Safety Edges are connected up to conventional E-Stop modules or to machine controls category 3 or higher in accordance with EN 954: In the case of the redundantly constructed SL/NC the E-Stop module or the machine controls should be equipped with a cross-fault monitoring system.