Double-action door systems GEZE – building and assembled in no time at all

The Pendulo C double-action door closer and the Patch Fittings fitting system from GEZE open a welcome possibility to install double-action doors in little time and very simply thanks to their pre-fitted and pre-integrated components. This is enabled through the use of a door closer which is already contained in the fitting - so a floor spring is no longer required.

GEZE Pendulo C – the door closer for double action doors - simple and discreet
Pendulo C is a door closer for double-action doors which open in both directions and always close in the central position. Due to its very low size, Pendulo C can be almost invisibly mounted in the aluminium Pendulo track. To enable simple and rapid installation of double action doors the door closer, which is fitted with closest the regulator, is located on the bottom Pendulo track pre-fitted to the door leaf. Patch fittings can also be fitted for the top pivot bearing in advance on the door leaf. This means that only the bottom floor and top pivot bearing need to be installed on site. After this, the door can be hung in place and the closer can be regulated.

GEZE Patch Fittings – technically perfect
Patch fittings are an installation-friendly fitting system for multifarious and secure fitting solutions in complete glass door systems both indoors and outdoors. Patch fittings shorten installation times due to rapid pre-fitting of all complete glass fittings. The patch fittings range enables technically perfect and optically appealing implementation of all the standard glass equipment. All fittings are constructed as modules and consist of the main body, function sets and clip-on covers. Glass cutouts and drillholes which are normally required can be carried out simply and quickly. Patch fittings allow problem-free adaptation to standard glass thicknesses of 10 to 12 mm. The elegant cover caps are manufactured in polished or burnished stainless steel.