GESPAC's PCISYS-58X
GESPAC's PCISYS-58X is a Single Slot 3U CompactPCI® CPU Board based on the rugged Intel Pentium® MMX fanless processor running at 166MHz. Ideally suited for systems requiring reliability and small, robust form factor, the PCISYS-58X is a perfect fit for industrial embedded real time machine control, industrial automation, transportation, defence and any other harsh environment targeted applications.
Keeping the flexibility of the 16-bit PC/104 extension port and an excellent performance to price ratio, the new PCISYS-58X processor board is a real step ahead in the GESPAC's Intel based rugged CPUs road map, improving the overall performances of the existing rugged, railway certified, STPC Industrial CPU board PCISTI-1. Key points of the new design are the low power & passive heat sink operation capability along with the -40° to +85°C industrial temperature operating range, assured by a 166MHz clocked Pentium low power processor.
In addition to all of the standard PC functions available for the development phase, the PCISYS-58X board offers many extended temperature features including Fast Ethernet and dual USB. Flash Disk capability for high reliability data storage up to 192+MB is also supported by using either the Ata-Disk-Chip or the Compact Flash technology (adaptor needed). One SO-DIMM socket allows the installation of 128+ MB of SDRAM for optimum performance, while the board boots on 256 kB of Flash EPROM. Analogue monitor & Digital flat-panel display support (high
performance AGP Graphics with 4MB of fast VRAM), are available as well for the development phase through a DVI-I connector incorporating PanelLink® Digital technology (Silicon Image). The user can disable the graphics whenever extended temperature operations are required.
The 10Base-T/100Base-Tx Ethernet interface is implemented by using the Intel 82559ER controller while the dual USB 1.1, along with the on-board RTC, Watchdog and Reset circuitry, is directly handled by the PCI to ISA bridge. The Intel 82439TX chipset takes care of the 512kB Level 2 Cache memory and the SDRAM management. The 256kB of Flash EPROM boot are soldered on board.
Standard PC interfaces are implemented through a PC/104 extended temperature mezzanine module (PCCEXT-58X), which provides RS-232/485 standard 16Cx5x 1000V isolated COM1&2. For the development phase is always possible to use the development mezzanine module referenced as PCCEXT-58 and which provides COM1 to 4, LPT1, keyboard, mouse and floppy disk. A standard IDE interface is available both on-board (adaptor needed) and through the rear I/O J2 connector.
The PCISYS-58X's 4HP front panel includes status LEDs and standard connectors for dual USB, Fast Ethernet and DVI-I. The PCISYS-58X is fully compatible with EMC regulations and with the CompactPCI® specifications PICMG™ 2.0 R3.0. The board handles a 32-bit 33 MHz CompactPCI® Bus Access and 3.3V/5V signalling.
The PCISYS-58X is 100% PC compatible, allowing it to run popular operating systems such as DOS, Window®9X,
WindowsNT™/00, Windows®CE, and Linux, as well as embedded Real Time operating systems such as VXWorks® and QNX®.
Keeping the flexibility of the 16-bit PC/104 extension port and an excellent performance to price ratio, the new PCISYS-58X processor board is a real step ahead in the GESPAC's Intel based rugged CPUs road map, improving the overall performances of the existing rugged, railway certified, STPC Industrial CPU board PCISTI-1. Key points of the new design are the low power & passive heat sink operation capability along with the -40° to +85°C industrial temperature operating range, assured by a 166MHz clocked Pentium low power processor.
In addition to all of the standard PC functions available for the development phase, the PCISYS-58X board offers many extended temperature features including Fast Ethernet and dual USB. Flash Disk capability for high reliability data storage up to 192+MB is also supported by using either the Ata-Disk-Chip or the Compact Flash technology (adaptor needed). One SO-DIMM socket allows the installation of 128+ MB of SDRAM for optimum performance, while the board boots on 256 kB of Flash EPROM. Analogue monitor & Digital flat-panel display support (high
performance AGP Graphics with 4MB of fast VRAM), are available as well for the development phase through a DVI-I connector incorporating PanelLink® Digital technology (Silicon Image). The user can disable the graphics whenever extended temperature operations are required.
The 10Base-T/100Base-Tx Ethernet interface is implemented by using the Intel 82559ER controller while the dual USB 1.1, along with the on-board RTC, Watchdog and Reset circuitry, is directly handled by the PCI to ISA bridge. The Intel 82439TX chipset takes care of the 512kB Level 2 Cache memory and the SDRAM management. The 256kB of Flash EPROM boot are soldered on board.
Standard PC interfaces are implemented through a PC/104 extended temperature mezzanine module (PCCEXT-58X), which provides RS-232/485 standard 16Cx5x 1000V isolated COM1&2. For the development phase is always possible to use the development mezzanine module referenced as PCCEXT-58 and which provides COM1 to 4, LPT1, keyboard, mouse and floppy disk. A standard IDE interface is available both on-board (adaptor needed) and through the rear I/O J2 connector.
The PCISYS-58X's 4HP front panel includes status LEDs and standard connectors for dual USB, Fast Ethernet and DVI-I. The PCISYS-58X is fully compatible with EMC regulations and with the CompactPCI® specifications PICMG™ 2.0 R3.0. The board handles a 32-bit 33 MHz CompactPCI® Bus Access and 3.3V/5V signalling.
The PCISYS-58X is 100% PC compatible, allowing it to run popular operating systems such as DOS, Window®9X,
WindowsNT™/00, Windows®CE, and Linux, as well as embedded Real Time operating systems such as VXWorks® and QNX®.
This product information
is expired!
Use our search-function for current products ...
is expired!
Use our search-function for current products ...
