Made to measure in four days: A new stainless steel low profile belt conveyor, designed to meet the highest demands of hygiene
Complying in full with standards required in the food, pharmaceutical and chemical industries: Geppert-Band's stainless-steel belt conveyor GES-25 can be used in the most restricted operating areas. It is ideally suited to transport small parts, and meets the highest demands of hygiene. Made to measure within four days.
The GES-25 is available in various sizes, from belt widths of only 50mm and lengths of only 500mm up to belt widths of 200 mm and belt centre lengths of 6000mm. The GES-25 can thus be easily integrated into existing production processes. Its frame height of only 25 mm combined with the extremely small deflecting roller (30 mm in diameter) means it has been optimised for small and dedicate parts.
The patented adjusters on both drive and deflecting roller prevent the accumulation of dirt, since all moving parts and open threads are located in the interior of the units, which is why it can be cleaned more easily and is extremely hardwearing.
Besides the highest quality of their product, GEPPERT-Band also place a premium on customer service. The GES-25 is made to measure within not more than four days. In case of failure of the product, spare parts are supplied free of charge for a period of two years without the customer having to prove that the unit was already defective on delivery. This warranty clearly exceeds the EU-decree in force since 2002.
The GEPPERT-Band stainless-steel range further includes larger, horizontal conveyors available in belt widths between 50 and 1,000 mm, lengths ranging from 500 to 12,000 mm and total belt loads of up to 100 kg. In addition, angled stainless steel conveyors are available, having horizontal and rising sections with an infinitely variable rising angle between 40 and 60 degrees. Useable belt widths of between 130 and 530 mm, total lenghs in both flat and rising sections from 500 up to 3,500 mm and a total belt load of up to 30 kg. are also available. A complete overview of the product range, including aluminium and steel units, can be found at: www.geppert-band.de.
The patented adjusters on both drive and deflecting roller prevent the accumulation of dirt, since all moving parts and open threads are located in the interior of the units, which is why it can be cleaned more easily and is extremely hardwearing.
Besides the highest quality of their product, GEPPERT-Band also place a premium on customer service. The GES-25 is made to measure within not more than four days. In case of failure of the product, spare parts are supplied free of charge for a period of two years without the customer having to prove that the unit was already defective on delivery. This warranty clearly exceeds the EU-decree in force since 2002.
The GEPPERT-Band stainless-steel range further includes larger, horizontal conveyors available in belt widths between 50 and 1,000 mm, lengths ranging from 500 to 12,000 mm and total belt loads of up to 100 kg. In addition, angled stainless steel conveyors are available, having horizontal and rising sections with an infinitely variable rising angle between 40 and 60 degrees. Useable belt widths of between 130 and 530 mm, total lenghs in both flat and rising sections from 500 up to 3,500 mm and a total belt load of up to 30 kg. are also available. A complete overview of the product range, including aluminium and steel units, can be found at: www.geppert-band.de.
This product information
is expired!
Use our search-function for current products ...
is expired!
Use our search-function for current products ...
