Quality video over ordinary telephone wire...

Features:

• Connectivity for up to four cameras, each via a single RJ-45 4-pair cable
• Use with the NV-218A-PVD power-video-data transceiver at the camera
• Uses any third-party power supply to power cameras via UTP over
• significant distances
• (see Power Distance Chart)
• Cable-management solution from the camera to the Wiring Closet and on to
• the Control Room
• Wall-mountable; rack-mountable using the NV-RM8/10 panel

Typically installed in the Wiring Closet or IDF room, the NV-704J-PVD is a passive "pass-through" wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom data onto a minimum of 4-pair RJ-45 cables.

Power, video and data are converted at the camera using the NV-218A-PVD transceiver which utilizes a single 4-pair cable with RJ-45 connectors to deliver each camera's signals to the NV-704J-PVD. Up to four cameras are supported. The NV-704J-PVD receives low-voltage camera power from any third-party Class 2 power supply. Control Room connections are achieved with a single 4-pair RJ-45 cable (Exception: Two cables are required when all four cameras are in use and one or more require data.) Control Room connections may be made using the NV-413A, NV-452R, NV-862J, NV-1662J, or NV-3262J. All equipment employs industry-standard EIA/TIA 568B pinouts.