AnyBus-S Profibus DPV1 Interface Card
The extended DPV1 functions make it possible to transmit acyclic data between a Master (Class1/Class2) and DPV1 Slaves. The acyclic functions are available in addition and can be used simultaneous and independent of the cyclic data exchange. The AnyBus-S Profibus-DPV1 is available only with the 2k Byte parallel Dual Port Ram interface.
Profibus station address can be selected via switches on
the front side of the module or by software via the application
interface. A bus termination switch is located on the front side
of the module.
Key Features
Profibus station address can be selected via switches on
the front side of the module or by software via the application
interface. A bus termination switch is located on the front side
of the module.
Key Features
- Complete Profibus-DPV1 Slave module with functionality according to extensions of IEC 61158 (DPV1)
- Supports PA baud rate 45.45 kbit/s
- DPRAM parallel interface
- Supports Class1 & Class2 services
- Automatic baud rate detection (9600 bit/s - 12 Mbit/s)
- RS-485 optically isolated Profibus interface with DC/DC converter on-board
- Save/load configuration in flash supported
- Backward compatible to standard Profibus-DP
- AnyBus-S Starterkit and evaluation board available
This product information
is expired!
Use our search-function for current products ...
is expired!
Use our search-function for current products ...
